Torm Flexible Thermometer Limited Edition Cat

Read the instructions in the manual carefully before use.

1. Before any use, make sure to clean and disinfect the thermometer according to the instructions in the "Cleaning and disinfection" section of the user manual. Make sure the thermometer is not wet before taking a measurement.

2. Press the ON/OFF button, wait for the BEEP. The thermometer displays the last temperature stored in memory for 2 seconds, then the self-test temperature of 37°C. When the screen shows "Lo°C" and the "°C" symbol flashes, it means the thermometer is ready for use.

3. Place the thermometer in the mouth, rectum (recommended), or under the armpit: Oral temperature measurement: Do not use the thermometer in oral mode for children under 2 years old.
Before taking the measurement, keep your mouth closed for about 5 minutes, then place the thermometer under the tongue (see user manual) until the beep.
During the measurement, close your mouth tightly and breathe gently through your nose to avoid influencing the measurement with inhaled/exhaled air. Normal oral temperature ranges between 35.7°C and 37.3°C.
Do not use the thermometer for oral measurement after a rectal measurement without prior disinfection. Rectal temperature measurement (recommended): Lubricate the probe with petroleum jelly to facilitate insertion. Gently insert the probe (about 1 cm) into the rectum and wait for the beep. Do not force insertion into the rectum. In case of pain, remove the thermometer and choose another measurement mode to avoid injury. Normal rectal temperature ranges between 36.2°C and 37.7°C.
Axillary temperature measurement: Wipe the armpit with a dry towel and keep the arm pressed against the body for about 5 minutes before measurement. Place the probe in the hollow of the armpit and press the arm against the chest. Wait for the final measurement beep. Normal axillary temperature ranges between 35.2°C and 36.7°C.
This measurement mode should not be used if precise measurements are required.

4. The "°C" symbol flashes throughout the measurement process. When the flashing stops, the final measurement beep sounds for about 10 seconds. The thermometer then displays the body temperature. Always respect the minimum measurement time until the sound signal ("beep"). The measurement remains displayed even after the final measurement beep. To achieve a better body temperature measurement result, it is recommended to keep the probe in the mouth and rectum for about 2 minutes, or under the armpit for about 5 minutes, regardless of the sound signal. If you wish to take another measurement, turn off the thermometer with the ON/OFF button, wait 30 seconds before turning it back on.

5. To extend battery life, turn off the thermometer once the measurement is complete by pressing the ON/OFF button. If no measurement is taken, the thermometer will turn off automatically after 10 minutes.

6. After each use, clean and disinfect the thermometer thoroughly to ensure an accurate measurement and prevent contamination. Please consult the "Cleaning and disinfection" section for more details.

Finally, it is important to note that the measurement provided by this thermometer does not constitute a diagnosis and in no way replaces the advice of a healthcare professional.